Warning: Use of undefined constant inner - assumed 'inner' (this will throw an Error in a future version of PHP) in /home/vesconi6/public_html/vesconite-agri/wp-content/themes/vesconite/template-application.php on line 6
Tractors - Vesconite Agri

Tractors

MADE FOR WET AND DRY WORKING ENVIRONMENTS

Tractors need routine servicing to perform optimally in the field. A number of key areas within the drivetrain and steering components are prone to high wear and eventual failure, due to ingress of mud, water and dust. Vesconite has proven itself over many years as a superior performer in these challenging conditions, particularly where front loaders are utilised.

AXLE PIVOT
BUSH

Failure of this bush can result in costly problems with front differential couplings when a front shovel is fitted.

THE VESCONITE SOLUTION

Vesconite is an ideal replacement within this oscillating movement. The bushing requires no lubrication and has a high load-bearing capacity suited to front-end loaders.

KING PIN
BUSHES

Wear of these bushes results in vague steering movements. Nylon and bronze bushes are commonly used here, but are not ideal.

THE VESCONITE SOLUTION

Requiring no greasing (not the case with bronze), and far better wearing compared to nylon, Vesconite offers excellent performance in this application.

PLANETARY FINAL
DRIVE BUSHES

Traditionally bronze bushes have been used in this application, with failure common due to water ingress or low oil levels.

THE VESCONITE SOLUTION

All 12 of axle bushes can be replaced with Vesconite, which is unaffected by water and poor lubrication.

Order Your Free Vesconite Sample

Vesconite In Action

VESCONITE REPLACES CARRARO SHAFT BUSH
Vesconite was used successfully to replace the metal-on-metal shaft bush on the Carraro tractor. This bush is a critical component on tractors with front loaders, where additional weight and resultant wear becomes an issue. After fitting Vesconite, wear was substantially reduced, as was the time spent lubricating the original metal bushes.
VESCONITE USED IN RUBBER TRACK SYSTEM
Designed and manufactured for tractors in Australia, Vesconite pivot bushes are used in the rubber track system of Hi-Drive 200 tractors. Due to the consistently abrasive and wet working environment that the track operates in, Vesconite is the obvious choice. The Vesconite sleeves transmit full drive load on the track and show very little wear, even after thousands of hours of use.

OTHER AGRI APPLICATIONS

HARVESTERS

HARVESTERS

Grease-free and dirt- resistant, Vesconite is ideal for a number of rotating and oscillating bushes in harvesters – steering shaft and kingpin bushes among them.

TRAILERS

TRAILERS

Grease-free, high load-bearing and abrasion-resistant, Vesconite is perfect for use on undercarriage pivots and tow hitches, regardless of the harsh terrain.

HARROWS

HARROWS

Low wearing and maintenance-free, Vesconite has been successfully used in this challenging application, where dirt, water and grit make for a harsh wear environment.

vesconite bushes in agricultural sprayers

SPRAYERS

SPRAYERS

Vesconite can be depended on in those critical sprayer pivot points, articulating arms and steering bushes. Vesconite is not affected by chemicals.

HOPPERS

HOPPERS

Vesconite is a superior alternative to bronze in self-unloading hoppers. Grease and contaminant-free, Vesconite is a perfect material for oscillating bearings.

EARTH MOVERS

EARTH MOVERS

Vesconite is commonly used in earth-moving equipment, where high loads, oscillating movement, and low speeds are involved.

OUR OTHER INDUSTRIES

VESCONITE HYDRO

FIND OUT MORE

VESCONITE MARINE

FIND OUT MORE

VESCONITE PUMPS

FIND OUT MORE

VESCONITE RAIL

FIND OUT MORE